中華人民共和國國傢標準:鐵道客車通用技術條件(GBT12817-2004 英文版) [General Technical Specification for Railway Passenger Car

中華人民共和國國傢標準:鐵道客車通用技術條件(GBT12817-2004 英文版) [General Technical Specification for Railway Passenger Car 下載 mobi epub pdf 電子書 2024


簡體網頁||繁體網頁
中華人民共和國國傢質量監督檢驗檢疫總局,中國國傢標準化管理委員會 編



點擊這裡下載
    


想要找書就要到 圖書大百科
立刻按 ctrl+D收藏本頁
你會得到大驚喜!!

發表於2024-05-17

類似圖書 點擊查看全場最低價

圖書介紹

齣版社: 中國鐵道齣版社
ISBN:9787113201760
版次:1
商品編碼:12056851
包裝:平裝
叢書名: 中華人民共和國國傢標準
外文名稱:General Technical Specification for Railway Passenger Car
開本:16開
齣版時間:2015-04-01
用紙:膠版紙
頁數:


相關圖書





圖書描述

內容簡介

  《中華人民共和國國傢標準:鐵道客車通用技術條件(GBT12817-2004 英文版)》規定瞭標準軌距鐵道客車的基本要求、材料要求、各部結構與性能、塗裝、標記以及試驗方法與檢驗規則。
  《中華人民共和國國傢標準:鐵道客車通用技術條件(GBT12817-2004 英文版)》適用於構造速度不大於200kg/h的標準軌距鐵路新造一般用途全金屬車體的座車、臥車、行李車、郵政車、餐車、發電車和閤造車。公務車、衛生車、維修車、試驗車等特種用途車及其他有特殊要求的客車,亦可參照使用。

目錄

Foreword
1 Scope
2 Normative References
3 Basic Requirements
4 Material Requirements
5 Structure and Performance of Components
6 Coating and Marking
7 Testing Method and Acceptance Checking Rules
Appendix A(Normative) Ultimate Deviation on Main Dimensions of the Car Body Steel Structure and Limit on Unevenness for the 0utside Surface of the Steel Structure

精彩書摘

  《中華人民共和國國傢標準:鐵道客車通用技術條件(GBT12817-2004 英文版)》:
  5 Structure and Performance of Components
  5.1 Car Body
  5.1.1 Steel structure of car body shall be metal and whole-bearing type,with strength and rigidity
  meeting requirements of TB/T 1335-1996.
  5.1.2 Design of steel structure of car body shall meet requirements of anti-corrosion,and connection
  type should not be used.Anticorrosive material shall be used for parts vulnerable to corrosion,and
  measures shall be taken to prevent water vapor entering into the structure.Steel structure of car body
  shall have no filling after cutting or replacement of damaged parts in the following 1 5 years.
  5.1.3 Necessary installation holes shall be set on the steel structure of car roof,and the movable
  cover added shall be waterproof.
  5.1.4 Limit deviation of main dimensions of car body's steel structure and irregularity of outside
  surface shall meet requirements of Appendix A.
  5.1.5 After assembly of car body steel structure,water pouring test shall be made according to TB/T 1802-1996 and leakage shall be eliminated.
  5.1.6 Few or no wooded structure shall be used inside car body,and fire retardant and anticorrosive
  treatment shall be made for wooden structure.
  5.1.7 Interior structure and components of interior decoration shall be fixed firmly and easy for
  dismantlement and installation.Interior structure shall have enough strength and rigidity,and
  necessary noise reduction measures shall be taken at connection parts to avoid abnormal sound during operation. Obvious collision or scratch shall not exist on the surface of interior decoration,and
  irregularity limit of surface shall comply with the following requirements:
  Irregularity limits of plates mounted on end wall,side wall,partition and roof shall be no more
  than 2 mm,while the irregularity 1imit of floor surface shall be 13.omore than 3 mm.
  5.1.8 Heat insulation of car body shall be installed tightly,firmly and evenly.
  5.2 Door and Window
  5.2.1 As for passenger cars without air conditioner,movable windows shall be equipped.
  5.2.2 As for passenger cars with air conditioner,fixed windows shall be equipped and appropriate
  movable windows shall be installed.
  5.2.3 Insulated glass shall be adopted for passenger cars;transparent windows in the parcel and
  luggage rooms of parcel and luggage train and mail rooms of mail train shall use single window type.
  5.2.4 Frosted treatment shall be made on the surface of the lower part of kitchen windows and
  windows in toilet,1avatory,storage room and water boiler room.
  5.2.5 Windows shall be installed firmly.Movable window shall be opened flexibly,closed firmly and
  locked well.
  5.2.6 Train doors shall use folding,swing,sliding or plug(automatic and manual)types,and
  distribution of doors shall facilitate people's evacuation in case of emergency.Train doors shall be
  opened and closed flexibly,while lock,hinge,bolt and handle shall work well.As for automatic door,
  there shall be no loosening of fixed components and no leakage of gas path,control and protection
  functions of the door shall be complete and work well.The up and down of pedal of plug door shall be coordinated with the close and opening of door.
  5.2.7 The structure design of door and window shall be easy for glass replacement.
  5.2.8 Train door and window shall use safety glass that complies with requirements of GB 1 804 5;Glass of door and window shall be installed tightly and firmly,and be adaptable to pressure variation
  during train meeting;each sealing component shall have good waterproof and windproof performance.
  5.2.9 When train door and window are in opening or close position,stopping and locking device shall be equipped.
  5.3 Internal Equipment
  5.3.1 Main equipment installed inside cars shall meet requirements of relevant standards。
  regulations,and technical documents approved according to specified procedures。
  5.3.2 Safety protection facilities like fire extinguisher and safety hammer shall be installed on
  each car.
  5.3.3 Internal equipment serving for passengers directly shall be used safely and easily,and shall be marked with sign and instruction if necessary;equipment that not allow passenger to touch shall be marked with warning sign.
  5.3.4 Interior design of cars shall meet the principle of ergonomics,and full consideration shall be given to personal safety of passenger.
  5.4 Coupler,Draft Gear and Exterior Equipment of Car Body
  5.4.1 Automatic coupler or tight-lock coupler shall be used.When automatic one is used。its gauge shall meet requirements of GB/T4952-1995.Tight-lock coupler shall be able to connect with automatic one.
  5.4.2 Performance of car buffer shall comply with requirements of TB/T 1961-1987 and relevant technical documents.
  5.4.3 Draft gear of automatic coupler shall be assembled according to GB/T 12813-1991.
  5.4.4 After assembly of draft gear of automatic coupler,three postural operations and anti-creep performance shall be ensured.
  5.4.5 Vestibule and transition plate shall be set at connection parts between cars.Vestibule shall
  ensure safe and tight coupling.The distance between transition plate and rail top shall be 1 3 3 3 mm.
  5.4.6 At the side door of vestibule。foot step and handrail shall be installed for getting on and off the train.The lifting plate shall be installed firmly and lifted flexibly.And waterproof eave shall be set
  above side door.
  5.4.7 End wall of car shall be equipped with stairs for climbing on to the roof.
  5.4.8 Jacking pad shall be set at the end of body bolster and in the area within 2 m to the inner side of body bolster's central line.
  5.5 Bogie
  5.5.1 Bogie shall comply with requirements of TB/T 1490-2004 and relevant technical documents.
  5.5.2 Bogie shall have static strength。fatigue strength and dynamic performance test complying with requirements of TB/T 1335-1996,GB/T 5599-1985 and relevant technical documents.
  5.6 Braking Device
  5.6.1 Cars shall be equipped with automatic braking and manual braking devices.
  5.6.2 Braking device shall be assembly according to requirements of TB/T 1901-1999.
  5.6.3 Passenger cars with highest running speed over 1 20 km/h should be equipped with electropneumatic brake,disc braking equipment and anti-sliding device.
  5.6.4 As for passenger cars with air spring,the air used for braking system should be separated with
  airs for other devices like air spring.
  5.6.5 Emergency braking valve and pressure gage shall be installed inside car.The positions should be end B,and the devices shall work well.
  ……

前言/序言

  protection,earthing protection of car's metal components,journal temperature warning device-And the articles
  about heating and ventilation in the previous specification are incorporated into the Chapter 5“Structure and
  Performance of Each Part”of this new versiorh
  ——In material requirements,requirements on painting materials,fire retardant performance of car’s non-metallic materials and interior decorative materials are added.
  ——In the structure and performance of each part。new technical characteristics are added in ten parts such as car body,bogie and braking device,and some parts are revised.
  ——Requirements on painting and mark are added.
  Contents about environmental protection are added in relevant provisions.
  Appendix A is normative.
  This standard is proposed by Ministry of Railways of the People's Pepublic of China.
  The standard is managed by Standards and Metrology Research Institute of MOR.
  The standard is drafted by Standards and Metrology Research Institute of MOR,Changchun
  Railway Vehicles Co.,Ltd.,Tangshan Railway Vehicles Co.,Ltd.,CSR Qingdao Sifang Co.,Ltd.and
  CSR Nanj ing Puzhen Rolling Stock Co.,Ltd..
  The standard is mainly drafted by Sun Yan,Qi Bing,Pei Yanbin,Song Yinchuan,Sun Lingj un,Du Mingzhong,Yuan Shuqing,Shi Guiro 中華人民共和國國傢標準:鐵道客車通用技術條件(GBT12817-2004 英文版) [General Technical Specification for Railway Passenger Car 下載 mobi epub pdf txt 電子書 格式

中華人民共和國國傢標準:鐵道客車通用技術條件(GBT12817-2004 英文版) [General Technical Specification for Railway Passenger Car mobi 下載 pdf 下載 pub 下載 txt 電子書 下載 2024

中華人民共和國國傢標準:鐵道客車通用技術條件(GBT12817-2004 英文版) [General Technical Specification for Railway Passenger Car 下載 mobi pdf epub txt 電子書 格式 2024

中華人民共和國國傢標準:鐵道客車通用技術條件(GBT12817-2004 英文版) [General Technical Specification for Railway Passenger Car 下載 mobi epub pdf 電子書
想要找書就要到 圖書大百科
立刻按 ctrl+D收藏本頁
你會得到大驚喜!!

用戶評價

評分

評分

評分

評分

評分

評分

評分

評分

評分

類似圖書 點擊查看全場最低價

中華人民共和國國傢標準:鐵道客車通用技術條件(GBT12817-2004 英文版) [General Technical Specification for Railway Passenger Car mobi epub pdf txt 電子書 格式下載 2024


分享鏈接




相關圖書


本站所有內容均為互聯網搜索引擎提供的公開搜索信息,本站不存儲任何數據與內容,任何內容與數據均與本站無關,如有需要請聯繫相關搜索引擎包括但不限於百度google,bing,sogou

友情鏈接

© 2024 book.qciss.net All Rights Reserved. 圖書大百科 版權所有