内容简介
《Wavelets in Engineering Applications》收集了作者所研究的小波理论在信息技术中的工程应用的十多篇论文的系统化合集。书中首先介绍了小波变换的基本原理及在信号处理应用中的特性,并在如下应用领域:系统建模、状态监控、过程控制、振动分析、音频编码、图像质量测量、图像降噪、无线定位、电力线通信等,分章节详细的阐述小波理论及其在相关领域的工程实际应用,对各种小波变换形式的优缺点展开细致的论述,并针对相应的工程实例,开发出既能满足运算精度要求,又能实现快速实时处理的小波技术的工程应用。因此,《Wavelets in Engineering Applications》既具有很强的理论参考价值,又具有非常实际的应用参考价值。 目录
CONTENTS
PREFACE
ChApter 1 WAVELET TRANSFORMS IN SIGNAL PROCESSING 1 Introduction 1
1.1 The continuous wAvelet trAnsform 2
1.2 The discrete wAvelet trAnsform 3
1.3
1.4 The heisenberg uncertAinty principle And time-frequency decompositions 5
1.5 Multi-resolution AnAlysis 5
1.6 Some importAnt properties of wAvelets 6
1.6.1 CompAct support 6
RAtionAl coe.cients 6
1.6.2
1.6.3 Symmetry 6
Smoothness 6
1.6.4
1.6.5 Number of vAnishing moments 7
1.6.6 AnAlytic expression 7
1.7 Current fAst WT Algorithms 7
1.7.1 OrthogonAl wAvelets 7
1.7.2 SemiorthogonAl (nonorthogonAl) wAvelets 8
1.7.3 BiorthogonAl wAvelets 8
1.7.4 WAvelet pAckets 9
HArmonic wAvelets 9
1.7.5
Discussion 9
1.8 REFERENCES 10
ChApter 2 SYSTEM MODELLING 12
Introduction 12
2.1
2.2 The underlying principle of Fourier hArmonic AnAlysis 13
2.3 AutocorrelAtionwAveletAlgorithm 14
2.4 VibrAtion model selection with FT And AutocorrelAtion wAvelet Algorithm 16
2.5 Coe.cients estimAtion with leAst-squAres Algorithm 17
Results And discussion 19
2.6
2.7 ConditionmonitoringofbeAring 23
2.8 Concluding remArks 28
REFERENCES 28
ChApter 3 CONDITION MONITORING 30
3.1 WAvelet AnAlysis 30
3.2 FilterdesignAndfAstcontinuouswAveletAlgorithm 32
3.3 SmAll defect detection of beAring 37
3.3.1 Speci.c frequency rAnges monitoring 39
3.3.2 Signi.cAnt And nAturAl frequencies monitoring 39
3.4 Concluding remArks 41
REFERENCES 42
ChApter 4 PROCESS CONTROL 43
Introduction 43
4.1
4.2 VibrAtion And surfAce quAlity 44
4.2.1 TheoreticAl cAlculAtion of surfAce quAlity 44
4.2.2 VibrAtion during mAchining 46
4.3 AdAptive spline wAvelet Algorithm 47
4.3.1 BAttle-LemAri′e wAvelet .lter design 47
4.3.2 ArbitrAry .ne time-scAle representAtion 49
4.3.3 AdAptive frequency resolution decomposition 51
4.4 Methodologyofexperiment 53
Results And discussions 55
4.5
4.5.1 ExperimentAl results 55
Discussions 63
4.5.2
4.6 Concluding remArks 64
REFERENCES 65
ChApter 5 VIBRATION ANALYSIS 67
Introduction 67
5.1
5.2 MAchining process vibrAtion 68
5.3 WAvelet Algorithm with cross-correlAtion 69
5.4 ExperimentAlset-up 71
5.5 ExperimentAl results 73
Discussion 77
5.6
5.7 Concluding remArks 79
REFERENCES 80
ChApter 6 AUDIO CODING 82
Introduction 82
6.1
6.2 DSP ImplAntAtion of lifting wAvelet trAnsform 84
6.3 Embedded coding And error resilience 88
6.4 Results of experiment And simulAtion 91
Conclusions 93
6.5 REFERENCES 94
ChApter 7 IMAGE QUALITY MEASUREMENT 96
Introduction 96
7.1
7.2 WAveletAnAlysisAndtheliftingscheme 98
7.3 ImAge quAlity evAluAtion 102
7.3.1 ImAge noise AnAlysis 104
7.3.2 ImAge shArpness AnAlysis 105
7.3.3 ImAge brightness AnAlysis 106
7.3.4 ImAge contrAst AnAlysis 106
7.3.5 ImAge MTF AnAlysis 107
7.3.6 ImAge quAlity quAnti.cAtion And clAssi.cAtion 107
7.3.7 OptimisAtion of weighting coe.cients 108
7.4 ExperimentAl results And discussions 110
Conclusions 118
7.5 REFERENCES 119
ChApter 8 IMAGE DENOISING 121
Introduction 121
8.1
8.2 FAst lifting wAvelet AnAlysis 123
8.3 Noise reduction with wAvelet thresholding And derivAtive .ltering 127 GenerAl noise reduction 127
8.3.1 Fine noise reduction 128
8.3.2
8.4 ExperimentAl results And discussions 131
Conclusions 135
8.5 REFERENCES 135
ChApter 9 WIRELESS POSITIONING 138
Introduction 138
9.1
9.2 WAvelet notch .lter design 140
9.3 System model And nArrowbAnd interference detection 145
9.4 ExperimentAl results And discussions 147
Conclusions 155
9.5
REFERENCES 155
ChApter 10 POWER LINE COMMUNICATIONS 157
Introduction 157
10.1
10.2 MulticArrier spreAd spectrum system 162
10.3 CArrier frequency error estimAtion And compensAtion 169
10.4 Time-frequency AnAlysis of noise 170
10.5 Noise detection And .ltering 175
10.6 ExperimentAl results And discussions 178
Conclusions 183
10.7 REFERENCES 184
精彩书摘
ChApter 1
WAVELET TRANSFORMS IN SIGNAL PROCESSING
1.1 Introduction
The Fourier trAnsform (FT) AnAlysis concept is widely used for signAl processing. The FT of A function x(t) is de.ned As
+∞
X.(ω)=x(t)e.iωtdt (1.1)
.∞
The FT is An excellent tool for decomposing A signAl or function x(t)in terms of its frequency components, however, it is not locAlised in time. This is A disAdvAntAge of Fourier AnAlysis, in which frequency informAtion cAn only be extrActed for the complete durAtion of A signAl x(t). If At some point in the lifetime of x(t), there is A locAl oscillAtion representing A pArticulAr feAture, this will contribute to the
.
cAlculAted Fourier trAnsform X(ω), but its locAtion on the time Axis will be lost
There is no wAy of knowing whether the vAlue of X(ω) At A pArticulAr ω derives from frequencies present throughout the life of x(t) or during just one or A few selected periods.
Although FT is pArticulArly suited for signAls globAl AnAlysis, where the spectrAl chArActeristics do not chAnge with time, the lAck of locAlisAtion in time mAkes the FT unsuitAble for designing dAtA processing systems for non-stAtionAry signAls or events. Windowed FT (WFT, or, equivAlently, STFT) multiplies the signAls by A windowing function, which mAkes it possible to look At feAtures of interest At di.erent times. MAthemAticAlly, the WFT cAn be expressed As A function of the frequency ω And the position b[1]
1 +∞ X(ω, b)= x(t)w(t . b)e.iωtdt (1.2) 2π.∞ This is the FT of function x(t) windowed by w(t) for All b. Hence one cAn obtAin A time-frequency mAp of the entire signAl. The mAin drAwbAck, however, is thAt the windows hAve the sAme width of time slot. As A consequence, the resolution of
the WFT will be limited in thAt it will be di.cult to distinguish between successive events thAt Are sepArAted by A distAnce smAller thAn the window width. It will Also be di.cult for the WFT to cApture A lArge event whose signAl size is lArger thAn the window’s size.
WAvelet trAnsforms (WT) developed during the lAst decAde, overcome these lim-itAtions And is known to be more suitAble for non-stAtionAry signAls, where the description of the signAl involves both time And frequency. The vAlues of the time-frequency representAtion of the signAl provide An indicAtion of the speci.c times At which certAin spectrAl components of the signAl cAn be observed. WT provides A mApping thAt hAs the Ability to trAde o. time resolution for frequency resolution And vice versA. It is e.ectively A mAthemAticAl microscope, which Allows the user to zoom in feAtures of interest At di.erent scAles And locAtions.
The WT is de.ned As the inner product of the signAl x(t)with A two-pArAmeter fAmily with the bAsis function
(
. 1 +∞ t . b
2
WT(b, A)= |A|x(t)Ψˉdt = x, Ψb,A (1.3)
A
.∞
(
t . b
ˉ
where Ψb,A = Ψ is An oscillAtory function, Ψdenotes the complex conjugAte
A of Ψ, b is the time delAy (trAnslAte pArAmeter) which gives the position of the wAvelet, A is the scAle fActor (dilAtion pArAmeter) which determines the frequency content.
The vAlue WT(b, A) meAsures the frequency content of x(t) in A certAin frequency bAnd within A certAin time intervAl. The time-frequency locAlisAtion property of the WT And the existence of fAst Algorithms mAke it A tool of choice for AnAlysing non-stAtionAry signAls[2]. WT hAve recently AttrActed much Attention in the reseArch community. And the technique of WT hAs been Applied in such diverse .elds As digitAl communicAtions, remote sensing, medicAl And biomedicAl signAl And imAge processing, .ngerprint AnAlysis, speech processing, Astronomy And numericAl AnAly-sis.
1.2 The continuous
Wavelets in Engineering Applications 下载 mobi epub pdf txt 电子书 格式